Vankos has Proved it'S excellence in Contribution to Prestigious ganga rail Cum road bridge of indian railways.......Read More

HYDRAULIC PIPE BENDERS

Based upon a proved and tested design for the bending of standard and High Pressure Pipes ' VANKOS' VPB, 1050, 1080 & 10100 incorporate many desirable and uptodate features. All models consists basically of a bending frame of immense strength, entirely constructed from rolled steel sections, bolted and welded where necessary, to provide a rigid yet transportable structure upon which are mounted the Hydraulic Power Unit and Bend Formers.
Vankos Hydraulic Pipe Benders are capable of bending pipes as per is - 1239 ( PART-1) 1990. The Hydraulic Power Unit is a highly efficient powerful source of bending force developing 15, 30 and 50 tonne pressure, enough to bend the maximum size of tubes in the range with ease. The pump piston is made from high carbon steel, hardened and ground to precision micron finish. Hydraulic ram retraction is by spring, supplied with thick walled steel tripod for instant mounting at site or in shop ready for immediate use.

All spares and service after sales guaranteed.
Also made to order Special Purpose Hydraulic bending equipment with attached integral pumps of remote control pump unit-manual or motorised. Bending capacity upto 100 MM ( "4" ) NB.

HYDRAULIC PIPE BENDERS
TECHNICAL SPECIFICATIONS

MODELS

VPB - 1050 TRIPOD MODEL

VPB - 1080 TRIPOD MODEL

VPB - RC - 10100 FLOOR MODEL

Bending Capacity

10 to 50 mm NB 3/8 to 2"

10 to 80 mm NB 3/8 to 3"

10 to 100 mm NB 3/8/ to 4"

Bending Pressure

15 Tonnes

15 Tonnes

30 Tonnes

Approx Length, L

680

685

1180

Approx Width, W

865

920

1250

Approx Height, H

860

860

350







BENDING FORMERS

mm -Inch
10   -3/8
15   -1/2
20   -3/4
25   -1
32   -1 -1/4
40  - 1 - 1/2
50   -2

mm    Inch
10     -3/8
15     -1/2
20     -3/4
25    - 1
32     -1 -  1/4
40     -1  -1/2
50     - 2
65     -2   -1/2
80      -3

mm     -Inch
10      -3/8
15     - 1/2
20      -3/4
25      -1
32      -1  -1/4
40      -1  - 1/2
50      -2
65      -2  -1/2
80      -3
     >
100     -4

Side Hold Blocks

2 Nos.

2 Nos.

4 Nos.

Nominal Bore Size

10 -15 -20 -25

32 -40 -50 -65

80 -  -  -100





BANDING RADIUS

-VPB - 1050

-VPB - 1080

-VPB - 10100




46   - 46   - 100    -123

46   - 46   - 100    -123

46   - 46   - 100    -123




160   - 190   - 220    -

160   - 190   - 220   - 290

170   - 190    -230   - 285




-   - -   - -    --

350   - -   - -    --

335   - -   - -    -455

WEIGHT (APPROX)

80 KG.

115 KG.

320 KG.

TECHNICAL SPECIFICATIONS
MOTORISED HYDRAULIC PIPE BENDING MACHINE

The Vankos hydraulic Pipe Bending Motorised incorporates the time approved tested and highly successful technical features found in the famous range of VPB Manual Pipe Benders. The VMPB provides a completely versatile but highly portable range of tube bending machines for long operating life ant trouble free service on sales or in the workshop. Vankos Motorised Pipe Benders are capable of bending pipes as per IS : 1239 (Part-1) 1990.

VMPB 1050 (upto 2" Models) and VMPB - 1080 (upto 3" Models) have single acting spring loaded self retracting rams. VMPB 10100 (upto 4" Models) double acting hydraulic ram with hydraulic return a mere shifting of directional valve lever from forward to reverse positions ensures a rapid retraction with instant ejection of the bent tube from the former.

FAST UNIFORM BENDS UPTO 900 IN ONE SETTING 75% SAVING IN TIME AND LABOUR COST. Repeated test trails and demonstration have convinced many a hesitant customer that the VMPB with a fast setup time is a real time saver with smooth easy effortless one shot bending action-its provided to be four time faster than any other comparable power bender for e.g normal time to bend 80 mm (3") Tube to 900 in 100 seconds VMPB does it in 25 seconds.

1800 bend can be achieved in 2/3 stages by rotating/shifting pipe as per requirement.
All Steel solid heavy duty frame construction designed to operate in all kinds of working conditions - positively high output rate with high efficiency operation factor or - fully protected against overload the motorised pump unit delivers a steady flow of high pressure power with simple push button starter control.

BOTH MODEL (MANUAL & MOTORISED) ARE SUITABLE FOR CARBON STEEL PIPES, ALLOY STEEL PIPES & SEAMLESS PIPES.

FLOOR MODELS

VPB-RC-1050

VPB-RC-1080

-

Approx Length, L

680

685

-

Approx Width, W

865

920

-

Approx Height, H

245

250

-

TECHNICAL SPECIFICATIONS - MOTORISED PIPE BENDERS

MODELS

VPB - 1050 TRIPOD MODEL

VPB - 1080 TRIPOD MODEL

VMPB - 10100

Bending Capacity

10 to 50 mm NB(Medium, Heavy & Seamless)

10 to 80 mm NB(Medium, Heavy & Seamless)

10 to 100 mm NB(Medium, Heavy & Seamless)

Bending Pressure

15 Tonnes

15 Tonnes

30 Tonnes

Approx Length, L

680

685

1180

Approx Width, W

865

920

1250

Approx Height, H

245 mm Floor Model

250 mm Floor Model

350 mm Floor Mddel

Approx Weight

130 Kgs.

150 Kgs.

320 kgs.

Hyd. Rubber Hose

HYHE - 2 I Nos.

HYHE - 2 I Nos.

HYHE - 2 I Nos.







BENDING FORMERS

mm -Inch
10   -3/8
15   -1/2
20   -3/4
25   -1
32   -1 -1/4
40  - 1 - 1/2
50   -2

mm    Inch
10     -3/8
15     -1/2
20     -3/4
25    - 1
32     -1 -  1/4
40     -1  -1/2
50     - 2
65     -2   -1/2
80      -3

mm     -Inch
10      -3/8
15     - 1/2
20      -3/4
25      -1
32      -1  -1/4
40      -1  - 1/2
50      -2
65      -2  -1/2
80      -3
     >
100     -4

Side Hold Blocks

2 Nos.

2 Nos.

4 Nos.

Nominal Bore Size

10 -15 -20 -25

32 -40 -50 -65

80 -  -  -100





BANDING RADIUS

-VPB - 1050

-VPB - 1080

-VPB - 10100




46   - 46   - 100    -123

46   - 46   - 100    -123

46   - 46   - 100    -123




160   - 190   - 220    -

160   - 190   - 220   - 290

170   - 190    -230   - 285




-   - -   - -    --

350   - -   - -    --

335   - -   - -    -455

POWER PACK DETAILS FOR MOTORISED PIPE BENDERS
Type
MOTOR
WP
OT CAP
OIL DISCHARGE
OVERALL DIMENSION OF POWER PACK L x W x H
VHPP - 1ORVHPP  - 1/DA
1 hp- 440  V3  PH50  HZ
400
30 LTRS
1 LTRS / MIN
450 x 400 x 300
HYDRAULIC PIPE BENDER ( NEW MODEL )
TYPE CODE
CAPACITY (TONNE)
OVERALL (L x W x H)
DIE SETS
NETT WT / KGS
-
VHPB
12052
12
654 x 570 x 180
1/2" - 2" set of 6
40
-
vhpb 12076
16
660 x 630 x 210
1/2" - 3" set of 8
71
-
QUICKEST & EASIEST WAY TO START WORKING RIGHT AWAY - ASK FOR READY TO USE SETS, WHICH HAS OPTIMUM MATCH OF INDIVIDUAL COMPONENTS.

CUSTOMERS TO PROVIDE MAXIMUM POSSIBLE DETAILS FOR THEIR SPECIFIC REQUIREMENT

  • The most innovating engineering staffs and highly skilled experienced work force in the country with spares & services country wide.

  • Vankos can provide solutions to the special requirement of customers.
    Some Vankos Aircraft Jacks are available in special configuration not listed here.
    Give us your specification we shall designed it for you.

  • All dimensions are in mm unless otherwise stated.

  • Designs & dimensions are subject to alterations for the sake of improvement without notice