Vankos has Proved it'S excellence in Contribution to Prestigious ganga rail Cum road bridge of indian railways.......Read More

SPECIAL PURPOSE PRODUCTS

This is perhaps the single most important category which has made the Vankos an indispensable & a reckoning force in the field of hydraulics and pneumatics.

Vankos has been manufacturing Specialised Hydraulic products & equipments as per the customers requirements & specifications as such we have grown out into a multi-product & multi-range company. This has been one of the features of our adaptability & dynamism

in the successful manufacturing of the desired hydraulic equipment for our clients. Since the range covered under this category & classification is so vast that it is not possible for Vankos & company to give the details of all those products manufactured by us over the years. However we have tried to display few of the typical Specialised Products which we have specifically manufactured as per our customers requirements. Vankos & company can provide tailor made solutions to their customers & prospective customers in the field of Hydraulics. Vankos can design a total system or an individual component, for your specific job need , whatever you want , whatever be the problem.

HYDRAULIC GROUND HANDLING JACK (SELF CONTAINED)

PURPOSE / PROPOSED USE

This product is used in all critical areas where tightening or loosening of bolt/stud is required used where a leak free joint is required.

PRODUCT DESCRIPTION

This product is very simple to use is effective in producing accurate preloads on studs. This products is very simple to use is effective in producing accurate preloads on studs. Failure to properly seal a connection can result in hazardous leaks or penalties for violations of emissions regulations.

THE PRODUCT CONSISTS OF A HYDRAULIC UNIT, PUMP, HOSE, PRESSURE/FORCE GAUGE AND OTHER OPTIONAL ITEMS LIKE QUICK COUPLER ETC.HOWEVER ANY NUMBER OF HYDRAULIC UNITS CAN BE CONNECTED TOGETHER BY HOSE AND DISTRIBUTOR TO A COMMON PUMP TO SUIT CUSTOMER REQUIREMENT.THE BOLT/STUD IS STRETCHED AXIALLY BY HYDRAULIC UNIT TO AN EXACT PRESSURE/FORCE WHICH CAN BE READ ON GAUGE. HIGH PRESSURE OIL FROM HAND OPERATED PUMP IS TRANSMITTED TO THE BOLT/STUD THROUGH HYDRAULIC UNIT. NUT IS TIGHTENED ONCE STRETCHING IS ACHIEVED AND THAN PRESSURE IS RELEASED.THIS BRINGS THE NUT TO ITS ORIGINAL POSITION THUS CREATING AN EXACT TORQUE. MORE THAN ONE HYDRAULIC UNIT CAN BE CONNECTED TO A SINGLE COMMON PUMP.

FEATURES

ACCURATE, LABOUR AND TIME SAVING, EFFORTLESS, SAFE, SIMPLE MECHANISM TO OPERATE, VERY
COMPACT, OPERATING FAST, EASY MAINTENANCE, SPARES AND SERVICE COUNTRYWIDE.

USER INDUSTRIES

THERMAL POWER PLANTS, REFINERIES, CHEMICAL PLANTS, NUCLEAR POWER PLANTS ETC.

APPLICATIONS

STEAM AND GAS TURBINES, DIESEL ENGINES, PRESSURE VESSELS, HEAT EXCHANGERS, PIPELINE FLANGES ETC.

SPECIAL PURPOSE JACKS

PURPOSE / PROPOSED USE

Suitable for lifting and leveling heavy loads where working place is inaccessible or tight working areas are available. These light, handy, compact jacks fit easily into most cramped spaces.

PRODUCT DESCRIPTION

The product consist of a Hydraulic Unit, Pump and Hose and other optional attachments like Pressure / Force Gauge, Quick Coupler etc. Jack body is made of Alloy Steel/Heat treated Alloy Steel. A lock nut can be provided for prolonged load support. These Jacks are also known as LOW PROFILE JACKS.

CAPACITY

5 to 150 Tonnes

CAPACITY

OPTIONS AVAILABLE TO CUSTOMER

Pressure / Force Gauge Quick Coupler Mounting Holes

USER INDUSTRIES

Heavy Engineering Industries, Ports, Shipyards, Cement Industries, Chemical Plants, Refineries, Nuclear Power < Plants, Thermal Power Plants, Mines. Etc.

APPLICATIONS

Maintenance, Production, Fabrication, Construction Sites Etc.

FEATURES / ADVANTAGES

::Light Weight
:: Due to its compactness easy to use in confined areas.
:: Does jobs fast & easy.
:: Minimum labour & maximum productivity
:: Working pressure available upto 700 bar.
:: Plain ram or threaded ram.

HYDRAULIC FLANGE SPREADER

TYPE:: VHFS - 10 / 54


CAPACITY:: 10 TONNES


CUSTMER:: GAIL


APPLICATION

FOR SPREADING / REPAIRING TWO FLANGES
WHICH ARE STUCK DUE TO PROLONGED USE

HYDRAULIC CRIMPING TOOL

PROPOSED / PROPOSED USED OF PRODUCT

For crimping of Aluminum& Copper Conductors

PRODUCT DESCRIPTION

Full set of product consist of a Hydraulic unit which is connected to a Pump by means of a Hose. Hence, Hydraulic unit can be safely operated from a remote distance.
Optional accessory Quick Coupler can also be attached to the pump




CAPACITY

10 to 50 Tonnes

FEATURES / ADVANTAGE

FOR SPREADING / REPAIRING TWO FLANGES WHICH ARE STUCK DUE TO PROLONGED USEHydraulic Crimping Tool decreases operator fatigue normally associated with manual crimping. It minimizes downtime and increases productivity. Construction material of Hydraulic unit is Alloy Steel and Dies are made of heat treated Alloy Steel.
Labour and Time saving, Effortless, Saf e, Simple Mechanism to operate, Very Compact, Operation is Fast, Cold Process, Easy Maintenance, Spares and Service Countrywide/p>

USER INDUSTRIES

:: Electrical Equipment Manufacturer, Thermal Plants, Construction Sites, Electrical Contractors, Power & Distribution Industry, Etc.

HYDRAULIC LOAD CELLS

PROPOSED / PROPOSED USED OF PRODUCT

Removing & Installing Track Master Pins and Bushings.

PRODUCT DESCRIPTION

Removing & Installing Track Master Pins and Bushings has always been a troublesome task. But now this portable yet versatile set makes a tough job fast and easy.
A set consist of a Double Acting Hydraulic Jack (With Centre Hole) and a Pump, C-Frame, Hose, Pressure Gauge, Quick Coupler, Forcing Screw, a basic Servicing kit and a Tooling kit.

CAPACITY

100 Tonnes

USER INDUSTRIES

Cement Plants, Steel Plants, Refineries, Mines, Construction Sites, Ports, Etc.

TECHNICAL SPECIFICATIONS









PROPOSED / PROPOSED USED OF PRODUCT

For measurement of any kind of Thrust, Weighing of Large Assembled Structures, Measurement of Reaction Loads of Concrete Beams Etc.

PRODUCT DESCRIPTION

A Hydraulic Load Cells measures compressive Loads in terms of Fluid Pressure. These compression Loads Cells are of compact size and robust design to withstand 20% overload. It consists of Outer Body (Cylinder) and Inner Piston (Ram) which are its main components.

CAPACITY

5 to 500 Tonnes.

FEATURES / ADVANTAGES

::Dual Range Readout in KG & Tonnes.
::Accuracy +- 20%
::Direct or Remote Mounting Options Available.
::Top Swivel Pad (On Request) Reduces Eccentric Loading For Improved Accuracy.
:: Hardchrome Plated Piston Rod.

USER INDUSTRIES

::Mines, Fabricators, Construction Companies Etc.

WE CAN ALSO MANUFACTURE TAILOR MADE LOAD CELLS TO SUIT CUSTOMERS REQUIREMENT.

HYDRAULIC COMPRESSION LOAD WEIGHING SYSTEM

Hydraulic Compression Load Cells, provide, spot weighing facility in a most portable and inexpensive way. Loads (Wagons/Containers/Tankers etc.) can be be jacked up and the resultant hydraulic pressure can be conveniently read in terms of tonne or kilograms depending upon the choice of measuring pressure gauge. Gang operated weighing system can be from 10 tonnes to 100 tonnes or more. Choice of Hand Pumps or Power Packs with electric motor / diesel / kerosene / petrol engines.

QUICKEST & EASIEST WAY TO START WORKING RIGHT AWAY - ASK FOR READY TO USE SETS, WHICH HAS OPTIMUM MATCH OF INDIVIDUAL COMPONENTS.

CUSTOMERS TO PROVIDE MAXIMUM POSSIBLE DETAILS FOR THEIR SPECIFIC REQUIREMENT

  • The most innovating engineering staffs and highly skilled experienced work force in the country with spares & services country wide.

  • Vankos can provide solutions to the special requirement of customers.
    Some Vankos Aircraft Jacks are available in special configuration not listed here.
    Give us your specification we shall designed it for you.

  • All dimensions are in mm unless otherwise stated.

  • Designs & dimensions are subject to alterations for the sake of improvement without notice